Achieve Maximize Efficiency and Productivity with CTS Test and Reclaim Systems
主页 » 测试解决方案 » 示踪气体泄漏测试系统 » 氮气净化泄漏测试 » TracerMate CS with Nitrogen Purge Leak Testing

Nitrogen Purge Leak Testing

[TracerMate CS with Nitrogen Purge Leak Testing]

* CTS Will follow-up with you on your final quote.

数量:
大量订购: 1

The TracerMate Nitrogen Purge System has three main components: the Nitrogen Purge Clam Shell test fixture, the Mass Spectrometer gas analyzer, and the TracerMate tracer gas management instrument. Together these components provide a tracer gas leak detection system that is both sensitive and is much less time dependent than an accumulation tracer gas testing methods.

Highlights:

  • Localized Sniff Testing with superior background control
  • Increased sensitivity for improved accuracy
  • Low pressure Nitrogen purge reduces background to 10-6 scc/s
  • Low cost tracer gas testing method

Custom portable Nitrogen
Purge Clam Shell System

CTS’ patented Purging Clam Shell provides an isolated environment to leak test an area of the part by creating a purge gas shield around the part to control atmospheric background.  During the test, the inner chamber collects tracer gas, while the outer chamber provides a constant low pressure Nitrogen curtain to hold back and prevent ambient background from entering. Meanwhile, the tracer gas leaking out of the part into the chamber is drawn into the Mass Spectrometer and analyzed.

The Mass Spectrometer, like the Inficon LDS3000XL shown here, is used detect qualifiable amounts Helium or Hydrogen gas escaping from a micro-leak. When a tracer gas is detected it signals the TracerMate instrument that the gas concentration being monitored exceeded the leak rate setpoint (set by TracerMate) to Reject the part test.

The CTS Sentinel TracerMate CS instrument is our all-in-one tracer gas management system. It provides part evacuation, test pressure, gross leak testing, tracer gas backfill, and executes the exhaust process. TracerMate integrates easy to tracer gas leak test systems, it communicates with most Mass Spectrometers, and it provides test result management for process control



CTS can design a custom Purging Clamshell System to fit your application optimized for both accuracy and low cycle time. For you next project contact Cincinnati Test Systems-the unmatched leader in Function and Leak Test Systems.