Sentinel Blackbelt Pro

Advanced Product Features

• Wall mount configuration 16.25” W x 13.5” H x 10” D
• Benchtop configuration 11” W x 12.5” H x 17” D
• Powerful 32-bit processor & (8) 24 –bit A/D converters
• Language neutral color LCD, 9.25” touch screen,  480 x 272 operator display
• XY Graphing (pressure, loss, or flow)-English, Chinese, Korean, Spanish
• On-screen test status identifies Pass/Fail/In-test/Error
• Benchtop has independent port LED Pass/Fail; lighting
• Barcode ready input RS232 Alpha-numeric string stored with test result.
• Modular pneumatic and control packages
• Single test channel

Standard Features

• Auto Calibration includes mass flow leak standard certified for pressure and flow
• Transducer zero and span are automatically reset during auto calibration
• “Performance factor” calibration feedback ensures accurate results
• Self Test isolates the test instrument pneumatics to verify a “no leak” condition
• Features ensure accurate results and easy operator setup and troubleshooting
• Firmware validation document included

Standard Test Pressure Ranges

      Standard pressure transducer, valve manifolds, and regulator ranges:

          -14.5, -2, -0.1 to 4”HG, 0.5, 2, 30, 100, 200, 400, 500 (psig) with electronic regulation

• Std. Cv flow valves and test manifold available up to 100 psig
• High Cv flow valves and manifold available up to 200 psig range allows 5 times faster fill and exhaust to reduce cycle times on large parts
• Low volume (0.07cc) manifold available
• Absolute pressure transducer
• Six point pressure calibration
• Data resolution 0.00001 psi/ and scc/m.
• Optional electronic regulator available with multi-point calibration

Mass Flow Sensor Ranges

CTS will optimize the flow sensor & flow range per application.
Contact Application Engineering for available mass flow sensors.
Standard delivery range:

• 0.5 – 50 scc/m
• 2.0 – 250 scc/m
• 30 – 3000 scc/m
• 2, 30, & 100 psig
   

Selectable Test Units of Measure

• Pressure: PSIG, PSIV, inH2O, cmH2O, mmH2O, kg/cm2, ATM, inHg, cmHg, mmHg, kPa,  Pa, MPa, Bar,  mBar, Torr
• Flow: Sccm, sccs,  scch,  slpm,  slps,  slph, s
• Time: Sec, msec, min
• Units of measure can be instrument global or per test program

Tooling Control

• 18inputs/18outputs with  programmable tooling motions with feedback
• Part marking control
• Tooling I/O is  externally connected
• I/O 24 VDC – I/O cables supplied with instrumentation

Test Data Storage

• 1 million part test results including Date / Time / Barcode / Test Results
• Selectable part serialization in the test data stream
• SPC data tracking for part traceability
• Expandable download through USB port

Electrical Requirements and Connectivity

• 88-264 VAC, 47-63 Hz or optional 22-26 VDC
• RS232(2)
• Telnet (2), (Ethernet IP future)
• Email Alerts
• “SmartKey” Digital ID for 21CFR Part 11 tracking
• Barcode ready (RS232)
• Mobile text
• (3) USB mass storage device for backup, restore, and reports (FAT32, USB1.0,1.1,2.0)
• ¼” Colder fitting for test line attachment